Boat 1 · side profile + top-down · GitBoat v10.5 deck labels · no Boat-2 gear
Boat 1 physical placement - side + plan. Solid boxes open wiring pages; dashed/grey = label only (no atlas page). Not typed wires.
Deck (living v10.4a, Instrument Post sec 11): Deck GPS antenna (on the deck, not the post) is bolted to a 6 in square G10 pad glued flat to the deck wherever there is room near the post, clear of the faired boot (its edge is about 13 in from the post centerline); the planned side is port, opposite the Iridium A dome. Pending 131q (answered): the GPS pad goes wherever there is room near the post, clear of the boot; no set distance. The pylon GPS antenna is left off this drawing on purpose. Iridium A is on the aft deck to starboard of the post, B forward on the foredeck; each own clear dome, solar keep-out.
Coax holes unchanged (A through the post stub, B its own forward hole; leftover A13 / item 111 not claimed closed). Electronics - CAN - Power - LAYOUT_PLACEMENT.md