Network switch box (A6a)

Aluminum, glued to the hull | not on lightning copper | entry 13 not drilled | GitBoat v10.5 A6a

Status notes
  1. Box plan Decided

    Network switch box plan. Entry 13 is not drilled. Nothing leaves on 24 V. Line 6 feeds only this switch.

A6a SWITCH BOX | NOT ON LIGHTNING COPPER Teltonika TSW202. DIN rail on the side wall, not the floor.TSW202always on Mean Well DDR-120B-48 set and sealed at 54.0 V. Always on.DDR-120B-48set 54.0 V Copper SFP in port 9 for Starlink.10GTEK SFP-TSFP 9 Post cameras, ports 1 and 2, each from the surge board.1-2 camsfrom surge Fisheye port 3 always on. Interior camera port 4.3-4 camsport 3 always Underwater Axis. No surge protector.port 5no surge Cat6 to the PoE light driver. No surge protector.port 6light driver Ethernet to Pi A.port 7Pi A Ethernet to Pi B, UTP, so the coupler metal touches no shield.port 8Pi B UTP Always-on 24 V, line 6, PG9.24 V inPG9 line 6 A6a entry 13 is not drilled. Nothing leaves on 24 V. Line 6 feeds only this switch.13 not drillednothing leaves Entry 9: RJ45 coupler, Ethernet to Starlink on SFP port 9, from its surge protector on the surge board.9 StarlinkRJ45, SFP 9 No ground lead. Surge grounds stay at the surge board.11 not drilledno ground CANH CANL power USB Ethernet UART I2C GPIO coax SPI