GitBoat pin 8454cb0 byte copy: Wing_RS485_Readers_and_Timing_2026-10-07.md. Closed at v10.2 (items 386 and 388): one Waveshare USB TO 2CH RS485, isolated, in the USB hub box for the tip meter and the compass; the DSD TECH SH-C30G on a hub port (Pending 443); the HWT905 on the tip 24 V ahead of the tip 5 V converter, which feeds only the Calypso. The Innomaker adapters named in the note were not taken. Electronics and Wiring Plan v10.2 A1a and Wing Power System v10.2.
The wing box to hub box cable is Mike's shielded Cat6 on hand, about 5 ft (Pending 446). Its shield is grounded at the wing box end only. It enters the hub by S port b. Where the tip box sits stays open.
The living wing box is wing-pod.html. This note is not a wiring sheet.