Parts by Box v10.1

Byte copy from GitBoat pin 353f702: Parts_By_Box_v10_1.pdf. Its A6 chip (page 8) says ON NO BUS and its A15 chip (page 13) says HOUSE BUS END, the same as Box Wiring Sheets v10.2. Item 399 closed 2026-10-09 when GitBoat rebuilt Parts_By_Box_v10_2.pdf. That living file is in this mirror at GitBoat 135e4f5 (blob 7c5fa714). This page stays the 353f702 byte copy (v10.1 boxes). The living sheet is Parts by Box v10.2.

Parts by box aft junction

A6 plastic keeps the DIN terminals, post fuses, wind-meter 5 V board, motoring-white relay, and encoder landing. A6a aluminum keeps the TSW202, the SFP module, and the DDR-120B-48. The PDF prints that supply as 54 V. The living setpoint is 54.0 V on Box Wiring Sheets v10.2 A6a. The five ETH-SP-G2 are parts of the near-deck surge board, not of either box. The house bus ends at Release Node B and the aft junction is on no bus. Pending item 352 lists mismatches found rebuilding this parts pack. They are not fitted changes.

Back to the atlas