Hull passthrough

GitBoat pin 8454cb0. Byte copy from GitBoat pin 06c566b: svg and png. Options note: Hydrophone_Hull_Passthrough_Options_2026-10-03.md. Way A is decided (Mike, 2026-10-03): Jacob WADI heat K257-1012-00 gland, 316L and Viton, M12 x 1.5, inner ring in, with Aquarian NC3MXX-MOD so the S1eX pins slide out. Not a potted pass-through and not a plug and socket at the hull. This is not a box on Pi A. The BOM also names a Drill America M12 x 1.5 tap (Amazon B0CTWJDM29) with its 10.5 mm drill, because the set on hand is M12 x 1.75; that tap is not another hole.

Hydrophone hull passthrough reference drawing

Fin path: face groove. The drilled-hole sheet is a superseded proposal.

Item 387 is closed at v10.2. Closed item 389 replaces it: the living plug is the Xenhex screw-terminal XLR with ferrules (Science Payload Strategy v10.2), not the NC3MXX-MOD slide-out this 2026-10-03 drawing shows. The Jacob WADI gland in the drawing stays the decided gland. This sheet was not redrawn.

Back to the atlas